A2 Autumn wreath builder cards
Once you get started with making wreath builder cards you just can't stop!
Basic instructions for A2 wreath builder card:
1. Start in square orientation. Place image in the center top of card, and stamp. ***I'm using a Misti (any stamp positioner should work)***
2. Turn card to left - stamp.
3. Come back to center, and turn card to right, then stamp.
4. Flip card upside down. (180 degree turn) Keep stamp in same position in Misti. stamp image.
5. Turn card to left - stamp image.
6. Place card back to center, keep stamp in same spot in the Misti, but do not stamp image. Turn card to right - stamp image.
7. Place card back to center.
8. Change image. Place new image between center and right stamped image. Stamp new image.
9. Turn card to left - stamp.
10. Bring card back to center - turn card to right - stamp image.
11. Turn card to right and stamp. Looking at stamped card, there should be 3 of the first image, and 4 of the second image on card.
12. Flip card (180 degree turn) and repeat steps #8 - #11.
13. With card in square orientation place different stamp to the right, and stamp.
14. Turn card two turns to the right, and stamp.
15. Flip card (180 degrees) to square orientation - stamp.
16. Turn card two turns to right, and stamp.
17. Place card back to center. ***keep stamp in same position in the Misti*** Turn card once to the right. Stamp image in different color.
18. Return card to center - Turn card once to left - stamp.
19. Flip card (180 degrees) and repeat steps #17 - #18.
20. Add sentiment to center of card, and embellish.
There may seem like a lot of steps but it is worth it, and when you have done it a couple of times it will become easier. You can do a search on you tube to find videos if you are a visual learner.
A couple more cards for you to see...
2 comments:
So very pretty! Thank you for stopping by my blog this week!
Post a Comment